Magic - Speed Sculpt Builder Gel - Lush - 15ml

Essentials

Magic - NailGuard - Silicone Thin Base - 15ml

Apply this thin, flexible Magic base beneath the builder on the natural nail. It gives the builder its bonding layer before you sculpt the overlay or extension.

$22.75 Certified account required

Select Magic - NailGuard - Silicone Thin Base - 15mlQuantity for Magic - NailGuard - Silicone Thin Base - 15ml

Magic - NailGuard - Tackless Hyper Shine Top - 15ml

Seal the builder with a Magic top gel for a finished surface. Tackless Hyper Shine gives glossy shine without a sticky layer to wipe; choose another Magic finish if that better suits the design.

$22.75 Certified account required

Select Magic - NailGuard - Tackless Hyper Shine Top - 15mlQuantity for Magic - NailGuard - Tackless Hyper Shine Top - 15ml

Helpful Extras

Magic - Easy Shape Nail forms

EasyShape forms support the shape while you sculpt an extension. Stay within the length recommended for your builder; you don't need forms for a natural-nail overlay.

$19.97 Certified account required

Select Magic - Easy Shape Nail formsQuantity for Magic - Easy Shape Nail forms

Magic - Primer Pen

Primer Pen is optional; Magic does not require it for every service. Use it only when you choose this extra bonding step, and follow the directions for the exact pen.

$9.97 Certified account required

Select Magic - Primer PenQuantity for Magic - Primer Pen

Instructions & Downloads

1. Prep gently. Follow Magic’s nail preparation steps, cleanse with 99% alcohol or pure acetone, and avoid other-brand bonding products that can leave a film. Magic Primer Pen is optional; if used, follow its own directions before base.
2. Build the bond. Gently scrub a thin layer of Silicone Thin Base into the prepared nail and brush it smooth. Keep a gap from skin, cover the free edge as directed, and cure for 60 seconds LED or 2 minutes in a 36-watt UV lamp.
3. Apply with the built-in brush, sculpt controlled layers and keep it off skin. Cure each layer for 2 minutes UV or 60 seconds LED to the exact formula and lamp directions.
4. Refine the shape if needed, then complete your color or design and apply the chosen Magic top gel. Use each product’s own cure time; Hyper Shine is tack-free, so it needs no post-cure wipe.
5. Refine and finish with a compatible top coat. SpeedSculpt is file-off and supports refill maintenance; follow its directions rather than soaking it off.

• SpeedSculpt product instructions
• SpeedSculpt range and intended lengths
• Magic builder-system guide
• Magic application tutorials and step-by-step transcripts
• Magic Gel safety data sheets (SDS)